Insert the other cable.
Cisco network assistant offer user friendly GUI interface to easily configure trouble shoot and enable as well as monitor the network and cisco 2950 datasheet is the perfect choice as well.
Getting Started, Software Configuration, Hardware Installation brian lara cricket game 2007 for pc Guides.Follow these steps:.Step 15 Disconnect the switch from the PC, and install the switch in your production network.Including license AND warranty 1 About this Guide 2 Taking Out What You Need 3 Running Express Setup 4 Managing the Switch 5 Rack-Mounting 6 Connecting to DC Power 7 In Case of Difficulty 8 Obtaining Documentation 9 Obtaining Technical Assistance 10 Cisco Limited Lifetime.Troubleshooting Express Setup If Express Setup does not run, or if the Express Setup page does not appear in your browser: Did you verify that post successfully ran If not, make sure that only the syst and stat before starting Express Setup?If you configured the switch with an IP address that is in a different subnet from the PC, connectivity between the PC and the switch is lost.This enables the switch to connect to local routers and the Internet.Did you enter the wrong address in the If yes, re-enter in the browser, and press browser, or is there an error message?Follow the instructions to download the program to your.
Step 6 Move the circuit-breaker handle for the DC power source to the on position.
Cisco 6500 Series Manager User Guide.
This section includes Express Setup troubleshooting, how to reset the switch, how to access help online, and where to find more information.
Also covered are switch management options, basic rack-mounting procedures, port and module connections, power connection procedures for both AC- and DC-powered switches, and troubleshooting help.Address in your browser?For alternate mounting procedures, such as installing the switch in a 24-inch rack or on a wall, and for additional cabling information, refer to the Catalyst 2950 Switch Hardware Installation Guide.DC input FOR remote power supply specified IN manual.Statement 148 Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable.Statement 1074 Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.For additional installation and configuration information for Long-Reach Ethernet (LRE) switches and for all switch models, refer to the Catalyst 2950 documentation on Cis.Including license AND warranty 21 2 43, refreshing the PC IP Address 74 95, equipment That You Supply, before You Begin 10Installation Warning Statements 12Attaching the Brackets 2 1.Resetting the Switch This section describes how to reset the switch by rerunning Express Setup.Network Assistant offers advanced options for configuring and monitoring multiple devices, including switches, switch clusters, switch stacks, routers, and access points.